Instal Mojave On Unsupported Mac

1. Install Mojave On Unsupported Macbook Pro
2. Upgrade Unsupported Mac
3. Install Mojave On Unsupported Mac Dosdude1

So, it was the end of the line for my 27″ 2011 iMac. After 7 years of service, the new OS (MacOS 10.14 “Mojave”) wasn’t going to be able to be installed on the old faithful. There’s some tech reasons for that – Apple moved to minimum standard for graphics cards for their system (they have to support Metal). While there’s external GPU’s for my iMac, I haven’t seen one that supports Mojave. And, even if it did, I probably can’t afford it.

The Mojave 10.14.1 update does NOT install properly on unsupported machines, and could result in an unbootable OS. If you want to install the 10.14.1 update (and are not currently running 10.14.1), perform the following steps:. Download the latest version of Mojave Patcher. Download the installer using the Tools menu of Mojave Patcher. Mojave is being installed onto your Mac. Once the installer is done installing, shut down your computer. This time, instead of installing Mojave again we need to install the necessary patches for Mojave to run properly. Click macOS Post Install in either the side menu or from the dropdown menu in utilities. It is possible, thanks to a little tool called the macOS Mojave Patcher 1 created by a fellow that goes by dosdude1. I have an iMac 2011 that I use (it’s not my primary or even my secondary machine, but one I use mainly for Quora) and so I thoug. “If you’re an advanced Mac user and you’re reasonably brave (and have adequate backups), then it turns out you might be able to install and run MacOS Mojave on unsupported Mac hardware after.

And I certainly can’t afford a new Mac at the moment.

The is a bit of an issue, since I’ve got to be able to compile a project for release very soon. Well… shit.

Fortunately, there’s always someone somewhere that wants to get just a little more life out of their machine – in this case, the Mojave Patcher will do some trickery to load MacOS on a machine that’s not supposed to have it. Nice. Though, reading the notes, it mentions machines with a Radeon 5xxx or 6xxx series GPU had weird colors. Well, how bad could it be.

The answer is very. But, there’s a simple fix (for me, at least). Typically, I run dual screen. When starting the process, I turned off the second screen and went about installing, getting everything working, and back to developing software. It would be unusable with the “weird colors” if I wanted to do any graphics work.

I turned the second screen back on, which is attached via Thunderbolt to HDMI. Boom – suddenly all of my colors were correct again!

That didn’t solve the other problems, though – hardware acceleration is disabled, which means my fairly snappy iMac runs like a dog. For doing something like writing this blog, it’s fine (I’m using Chrome, though results appear the same in Safari.) I would have said YouTube would be worthless, but actually it seems to run YouTube videos just fine. Same goes for NetFlix, though there’s some issues with the animations for launching a show.

I’m dreading seeing what performance is like running the Android or iOS emulators (if they launch at all.) . I’ll find out what the damage is there tomorrow.

So is Mojave usable on my old machine? Yes. Is the machine still usable? Yeeeaaahhhh… for the most part. I think it’s gonna take me a bit to get used to the laggy interface. Since I have to compile stuff and sign it for the App Stores, I HAVE to run Mojave, otherwise I wouldn’t have bothered with the upgrade. Should you bother with it? Up to you if you’re on an old, unsupported Mac. (Obviously if you’re on a supported Mac, by all means upgrade)

Run into the color issue? Try plugging in a second monitor and see if that does the trick. Honestly, I have no idea why it worked, but it does. 🙂

Two updates to this (and probably some more to come later):

First, scrolling in Safari was laggy and choppy. Dragging windows around was choppy. Quick fix – lower the resolution from the maximum (2560 x 1440) to one step top (1920 x 1080) pretty much eliminated it. Not butter smooth, but a huge improvement on all of them. It’s much more usable.

Now for the “wow, that gets weird” part: the “weird colors” issue reappeared on my main monitor, but the secondary display has the right colors. Reverting back to the previous resolution doesn’t fix it. Definitely a WTF item. 🙂

Install Mojave On Unsupported Macbook Pro

Upgrade Unsupported Mac

Comments

Install Mojave On Unsupported Mac Dosdude1

The Mojave 10.14.1 update does NOT install properly on unsupported machines, and could result in an unbootable OS. If you want to install the 10.14.1 update (and are not currently running 10.14.1), perform the following steps:. Download the latest version of Mojave Patcher. Download the installer using the Tools menu of Mojave Patcher. Mojave is being installed onto your Mac. Once the installer is done installing, shut down your computer. This time, instead of installing Mojave again we need to install the necessary patches for Mojave to run properly. Click macOS Post Install in either the side menu or from the dropdown menu in utilities. It is possible, thanks to a little tool called the macOS Mojave Patcher 1 created by a fellow that goes by dosdude1. I have an iMac 2011 that I use (it’s not my primary or even my secondary machine, but one I use mainly for Quora) and so I thoug. “If you’re an advanced Mac user and you’re reasonably brave (and have adequate backups), then it turns out you might be able to install and run MacOS Mojave on unsupported Mac hardware after.

And I certainly can’t afford a new Mac at the moment.

The is a bit of an issue, since I’ve got to be able to compile a project for release very soon. Well… shit.

Fortunately, there’s always someone somewhere that wants to get just a little more life out of their machine – in this case, the Mojave Patcher will do some trickery to load MacOS on a machine that’s not supposed to have it. Nice. Though, reading the notes, it mentions machines with a Radeon 5xxx or 6xxx series GPU had weird colors. Well, how bad could it be.

The answer is very. But, there’s a simple fix (for me, at least). Typically, I run dual screen. When starting the process, I turned off the second screen and went about installing, getting everything working, and back to developing software. It would be unusable with the “weird colors” if I wanted to do any graphics work.

I turned the second screen back on, which is attached via Thunderbolt to HDMI. Boom – suddenly all of my colors were correct again!

That didn’t solve the other problems, though – hardware acceleration is disabled, which means my fairly snappy iMac runs like a dog. For doing something like writing this blog, it’s fine (I’m using Chrome, though results appear the same in Safari.) I would have said YouTube would be worthless, but actually it seems to run YouTube videos just fine. Same goes for NetFlix, though there’s some issues with the animations for launching a show.

I’m dreading seeing what performance is like running the Android or iOS emulators (if they launch at all.) . I’ll find out what the damage is there tomorrow.

So is Mojave usable on my old machine? Yes. Is the machine still usable? Yeeeaaahhhh… for the most part. I think it’s gonna take me a bit to get used to the laggy interface. Since I have to compile stuff and sign it for the App Stores, I HAVE to run Mojave, otherwise I wouldn’t have bothered with the upgrade. Should you bother with it? Up to you if you’re on an old, unsupported Mac. (Obviously if you’re on a supported Mac, by all means upgrade)

Run into the color issue? Try plugging in a second monitor and see if that does the trick. Honestly, I have no idea why it worked, but it does. 🙂

Two updates to this (and probably some more to come later):

First, scrolling in Safari was laggy and choppy. Dragging windows around was choppy. Quick fix – lower the resolution from the maximum (2560 x 1440) to one step top (1920 x 1080) pretty much eliminated it. Not butter smooth, but a huge improvement on all of them. It’s much more usable.

Now for the “wow, that gets weird” part: the “weird colors” issue reappeared on my main monitor, but the secondary display has the right colors. Reverting back to the previous resolution doesn’t fix it. Definitely a WTF item. 🙂

Install Mojave On Unsupported Macbook Pro

Upgrade Unsupported Mac

Comments

Install Mojave On Unsupported Mac Dosdude1

• pls direct me to the right forum is the following question is not to be posted here.

  I downloaded the patch version dosdude1 Current version: 1.1.2.

  Created the flash drive and got a successful complete.
  

  Tested on a Macbook Pro mid 2011 and a new hard disk.

  The installation bar goes to the end and stays there, waited for a long time and have to shutdown the computer.

  I used Mojave Beta2 and i don't know if this is the problem. the dosdude1 version suggest the latest.

  So what Mojave beta works with Dosdude1 current version: 1.1.2?

  anybody
  

  P.S. I know there some old version of this tool, which one will work?
• I have a 2011 iMac, cant i just upgrade the chip, ram and graphics card to make it work?

• Not Happy, I have a iMac 27p SSD I7 mi-2009 fast, and NO MOJAVE UPGRADE, disgusting, Authorize only Mac's after 2012, that is 6 years old, use not acceptable when you think that your machine costs 4000 dollars, even Microsoft does not do that

  A Mac is not a Phone !
  

  I can understand that some features cannot be available, but the FULL release not available without a good technical cause cannot be accepted without fight.
  

  Is there an association there that could issue a class action to claim for Mojave support for our not so old Macs ?
  

  I have a 2009 PC with the latest Windows 10, Is not Apple ashamed to issue a Mojave is forbidden to a perfectly fast and modern machine like the iMac mid-2009 ? Same for MacBook Pro ? same for MacBook Air ? Please Steve come and clean their minds.
  

  We have to make the buzz on Social Networks and Mac information sites, If not the delay will be 5 years, then 3 years, then 1 year and we will have to go back to Windows PC.
  

  Best Regards
  

• Not Happy, I have a iMac 27p SSD I7 mi-2009 fast, and NO MOJAVE UPGRADE, disgusting

  Last it seems that there was a deal with Microsoft to use a microsoft antialiasing software up to 2017, this would restrict Apple Mac OS to Retina display, may be this is the real reason for discarding more that 5 years old Macs that are not Retina, a number of users having non retina screens (external ),are claiming that fonts are ugly with Mojave !!

  So do not upgrade to MOJAVE if you have non Retina external display, try it with a Dongle.

• That is correct, and is exactly what I do, OutdoorAppDeveloper I would like to add a question. What if you upgraded the RAM and switched from an HDD to an SSD, would it be ok to install Mojave on a 2009 Mac with all of these upgrades?
• I did this but now the MBP (early 2011) start complaining about hardware accelaration not turned on. Any ideas?
• I have an iMac mid 2011 and I really intend to buy a new one. But for now all I can do is update it to Mojave and upgrade my actual RAM and change disk to SSD.
• I attempted using macOS Mojave Patcher v1.2.2, downloaded Mojave as instructed, created the USB installer however after rebooting the USB installer could not be seen. There’s no way to boot from it at all, any ideas?

  edited January 2019
• There's a compelling reason for installing Mojave on my mid-2009 MacBook Pro: Adobe Creative Cloud 2019 will not install on any older versions of MacOS. DosDude's patcher worked flawlessly, and the only problem with the update is cosmetic; the menu bar has a grey tint. I was able to install CC 2019 and it works perfectly.
  

• There's a compelling reason for installing Mojave on my mid-2009 MacBook Pro: Adobe Creative Cloud 2019 will not install on any older versions of MacOS. DosDude's patcher worked flawlessly, and the only problem with the update is cosmetic; the menu bar has a grey tint. I was able to install CC 2019 and it works perfectly.
  

  You can disable transparency and then it'll work normally.
  system preferences>accessibility>Display> enabling 'reduce transparency' removes the 'greying out glitches in light mode.
  
• Posts: 2unconfirmed, member

  Hello!!! I'm in desperate need of some help. I tried following the provided in the mojave tool however I after step 6 my mac shut down and when I turn it on it has a cancel sign 🚫
  I'm wondering if anyone can help me at least get it back to how it was before?
  Thank you!
• Posts: 2unconfirmed, member

  
  I tried to add an emoji of the cancel sign but it didn't work so I'll add a picture of what it looks like here:
  
• 
  

  Though I used a different method and it worked like a charm. The methods can be found here- https://techrechard.com/how-to-install-macos-catalina-on-unsupported-mac/